Prop cant be made at more than 100mg/ml.Is this rubbish.

maza · 07-06-2008, 07:42 AM

I have a mate who homebrews his own prop and he makes them at 100mg/ml.He said to me that prop cant be made at more than 100mg/ml or it will crash or crystallise.

I have seen prop at 200mg/ml.

Is he fucked or is he serious?

bantamweight_B · 07-06-2008, 07:51 AM

I've made prop at almost 150mg/ml ,it didnt crash,though it does cause residual site soreness ,about 2 days after pinning.Pain free on injection

.In your words :He's fucked....LOL!!!

bm11 · 07-06-2008, 10:22 AM

You can painlessly go to 200mg/ml with eo.

btn2102 · 07-06-2008, 04:35 PM

Maza as BM says EO but the quality you can get there is sus.

Alchemy · 07-06-2008, 06:19 PM

I have seen it made up to 300mg/ml for research purposes only.No EO was used.

Alc

rippedhugensexy · 07-06-2008, 06:23 PM

Wonder if that much would make some serious soreness

maza · 07-06-2008, 10:37 PM

Thanks boys.I will tell him that it can be made at more than 100mg/ml, i reckon he still wont beleive me lol.

bmak · 07-07-2008, 01:01 AM

it can be done bro. last time i made prop i made it 200mg/mL with just the old 2/20 ba/bb ratio.

Max2 · 07-07-2008, 01:42 PM

No problem using EO and 2/20 BA/BB going to 150mg/ml AND no pain.

bantamweight_B · 07-07-2008, 04:21 PM

Quote:

Originally Posted by bmak

it can be done bro. last time i made prop i made it 200mg/mL with just the old 2/20 ba/bb ratio.

Any site soreness after pinning bmak?

freak007 · 07-07-2008, 07:47 PM

Quote:

Originally Posted by bm11

You can painlessly go to 200mg/ml with eo.

x2.defianetely can be done

bmak · 07-08-2008, 08:45 PM

Quote:

Originally Posted by bantamweight_B

Any site soreness after pinning bmak?

hell yes, so i had bought 200mg/ml in amps before, so i made some and finally tried it and now my quad, around the injection site is pink and slightly warm...... is this from the high concentration of prop, or do i gots an infection?? def going to thin out the mix to make it 150mg/mL tonight. this is two days after the injection. any help?

bantamweight_B · 07-08-2008, 09:38 PM

Yes Bro thanks.My homebrew 150mg/ml,cause's just general soreness 2 days after pinning.Usually takes several days to diminish.Is this stuff recrystalizing in muscle tissue,after the oil absorbs? Often the soreness travels from the general site as if its seeping.I do use 1 1/2" pin

.Though i know Im not getting an infection or dry abcess.Next time Im gonna make it with EO & no oil.

bmak · 07-09-2008, 12:04 AM

i think the eo is a good move. this is ridiculous.,

**Xanthine** · 07-20-2008, 04:28 AM

I don't use EO and I only make mine to 100mg/ml with oil and 2/20 ba/bb

Far less dramas unless you have made and shot your 200mg/ml prop before.

cell13 · 07-26-2008, 03:40 PM

You dont even need Ethyl Oleate anymore.You can make painless Test Prop 200mg/ml without that crap.

SmittyTheOX · 08-01-2008, 08:25 PM

It can be done, but WHY would you want to??

This question comes up once every week or so and I dont know why people want this super prop when 100mg/ml works perfectly

bulldog700 · 08-02-2008, 02:41 AM

I agree, of course it can be done but at what cost? !00 milligram is much safer. I knew of a guy that was producing a 600 ML test blend which I thought was crazy. Was it really ^)) i doubt it, all I know is that to suspend that many miligrams your just asking for pain and probably a good amout of melted down rubber stopper into your body.

bm11 · 08-02-2008, 12:53 PM

Quote:

Originally Posted by SmittyTheOX

It can be done, but WHY would you want to??

This question comes up once every week or so and I dont know why people want this super prop when 100mg/ml works perfectly

I would agree but there are cases when it makes sense, namely when injection volume is of concern. When advanced guys are shooting high amounts of multiple short estered compounds, say 100mg/day of prop, 100mg/day of masteron and 100mg/day of tren, if they were all brewed at 100mg/ml, you would be shooting 3ml a day, which also limits the amount of injection sites you have to work with, because 3ml is too much for smaller spots. Utilizing a high ml/ml EO preparation, you can brew a test/tren/masteron blend at 100/100/100 and just be shooting 1ml a day, which you can put almost anywere.

-BM11

bm11 · 08-02-2008, 12:55 PM

Or in another example, I have an upcoming blast where I will be running 200mg NPP EOD and 200mg prop EOD. If I were to make them both at 100mg/ml, that would be 4ml EOD, which would necessitate shooting ED really, to get the shot volume down to 2ml. If I made them each at 200mg/ml, or a blend at 100/100, I can shoot 2ml EOD, and give my body a break, because I am getting tired of shooting every day, I have been doing so for too long...

freak007 · 08-02-2008, 08:08 PM

Quote:

Originally Posted by bm11

Or in another example, I have an upcoming blast where I will be running 200mg NPP EOD and 200mg prop EOD. If I were to make them both at 100mg/ml, that would be 4ml EOD, which would necessitate shooting ED really, to get the shot volume down to 2ml. If I made them each at 200mg/ml, or a blend at 100/100, I can shoot 2ml EOD, and give my body a break, because I am getting tired of shooting every day, I have been doing so for too long...

by far the best answer so far,couldnt say it any better,

07-06-2008, 07:42 AM	#1 (permalink)
maza Senior Member maza's Stats Join Date: May 2007 Posts: 490 Status: Online maza's Info Location: Country:	Prop cant be made at more than 100mg/ml.Is this rubbish. I have a mate who homebrews his own prop and he makes them at 100mg/ml.He said to me that prop cant be made at more than 100mg/ml or it will crash or crystallise. I have seen prop at 200mg/ml. Is he fucked or is he serious?

07-06-2008, 07:51 AM	#2 (permalink)
bantamweight_B Senior Member bantamweight_B's Stats Join Date: Sep 2007 Posts: 2,407 Status: Offline bantamweight_B's Info Location: Country:	I've made prop at almost 150mg/ml ,it didnt crash,though it does cause residual site soreness ,about 2 days after pinning.Pain free on injection.In your words :He's fucked....LOL!!!
	__________________ Unless you try to do something beyond what you have already mastered,you will never grow- Emerson

07-06-2008, 10:22 AM	#3 (permalink)
bm11 Senior Member bm11's Stats Join Date: Feb 2007 Posts: 2,787 Status: Offline bm11's Info Location: Country:	You can painlessly go to 200mg/ml with eo.
	__________________ While BM11 generally tries to relay accurate information based the research that he has done, he is occasionally wrong, and offers apologies in advance for being so, on the occasions that wrong information is given.

07-06-2008, 06:19 PM	#5 (permalink)
Alchemy Senior Member Alchemy's Stats Join Date: Jul 2006 Posts: 2,962 Status: Offline Alchemy's Info Location: Chernobyl Country:	I have seen it made up to 300mg/ml for research purposes only.No EO was used. Alc
	__________________ Алхимия - фиктивный характер, который был создан социопатом. Вся информация, которая объявлена на правлении, - в целях развлечения только

07-06-2008, 06:23 PM	#6 (permalink)
rippedhugensexy Senior Member rippedhugensexy's Stats Join Date: Oct 2006 Posts: 162 Status: Offline rippedhugensexy's Info Location: Boston Country:	Wonder if that much would make some serious soreness
	__________________ Sorry if I'm bold, if you give me a heads up to cushion things for you, and I will :) Only some men live, but every man dies

07-06-2008, 04:35 PM	#4 (permalink)
btn2102 Senior Member btn2102's Stats Join Date: Jan 2007 Posts: 1,371 Status: Offline btn2102's Info Location: Home Country:	Maza as BM says EO but the quality you can get there is sus.

07-06-2008, 10:37 PM	#7 (permalink)
maza Senior Member maza's Stats Join Date: May 2007 Posts: 490 Status: Online maza's Info Location: Country:	Thanks boys.I will tell him that it can be made at more than 100mg/ml, i reckon he still wont beleive me lol.

07-07-2008, 01:01 AM	#8 (permalink)
bmak Senior Member bmak's Stats Join Date: Sep 2006 Posts: 1,903 Zitzen Zauber Champion! Zombie Horde Champion! Status: Offline bmak's Info Location: Country:	it can be done bro. last time i made prop i made it 200mg/mL with just the old 2/20 ba/bb ratio.

07-07-2008, 01:42 PM	#9 (permalink)
Max2 Member Max2's Stats Join Date: Aug 2006 Posts: 60 Status: Online Max2's Info Location: Country:	No problem using EO and 2/20 BA/BB going to 150mg/ml AND no pain.

07-08-2008, 09:38 PM	#13 (permalink)
bantamweight_B Senior Member bantamweight_B's Stats Join Date: Sep 2007 Posts: 2,407 Status: Offline bantamweight_B's Info Location: Country:	Yes Bro thanks.My homebrew 150mg/ml,cause's just general soreness 2 days after pinning.Usually takes several days to diminish.Is this stuff recrystalizing in muscle tissue,after the oil absorbs? Often the soreness travels from the general site as if its seeping.I do use 1 1/2" pin .Though i know Im not getting an infection or dry abcess.Next time Im gonna make it with EO & no oil.
	__________________ Unless you try to do something beyond what you have already mastered,you will never grow- Emerson

07-09-2008, 12:04 AM	#14 (permalink)
bmak Senior Member bmak's Stats Join Date: Sep 2006 Posts: 1,903 Zitzen Zauber Champion! Zombie Horde Champion! Status: Offline bmak's Info Location: Country:	i think the eo is a good move. this is ridiculous.,

07-20-2008, 04:28 AM	#15 (permalink)
Xanthine Moderator Anabolex Mod Xanthine's Stats Join Date: Jul 2006 Posts: 5,479 Status: Offline Xanthine's Info Location: Country:	I don't use EO and I only make mine to 100mg/ml with oil and 2/20 ba/bb Far less dramas unless you have made and shot your 200mg/ml prop before.
	__________________ Our doubts are traitors, and make us lose the good we oft might win by fearing to attempt.- William Shakespeare

07-26-2008, 03:40 PM	#16 (permalink)
cell13 New Member cell13's Stats Join Date: Mar 2007 Posts: 10 Status: Offline cell13's Info Location: Country:	You dont even need Ethyl Oleate anymore.You can make painless Test Prop 200mg/ml without that crap.

08-01-2008, 08:25 PM	#17 (permalink)
SmittyTheOX New Member SmittyTheOX's Stats Join Date: Apr 2008 Posts: 21 Status: Offline SmittyTheOX's Info Location: Aus Country:	It can be done, but WHY would you want to?? This question comes up once every week or so and I dont know why people want this super prop when 100mg/ml works perfectly

08-02-2008, 02:41 AM	#18 (permalink)
bulldog700 New Member bulldog700's Stats Join Date: Oct 2007 Posts: 10 Status: Offline bulldog700's Info Location: Country:	I agree, of course it can be done but at what cost? !00 milligram is much safer. I knew of a guy that was producing a 600 ML test blend which I thought was crazy. Was it really ^)) i doubt it, all I know is that to suspend that many miligrams your just asking for pain and probably a good amout of melted down rubber stopper into your body.

Thread Tools	Search this Thread

08-02-2008, 12:55 PM	#20 (permalink)
bm11 Senior Member bm11's Stats Join Date: Feb 2007 Posts: 2,787 Status: Offline bm11's Info Location: Country:	Or in another example, I have an upcoming blast where I will be running 200mg NPP EOD and 200mg prop EOD. If I were to make them both at 100mg/ml, that would be 4ml EOD, which would necessitate shooting ED really, to get the shot volume down to 2ml. If I made them each at 200mg/ml, or a blend at 100/100, I can shoot 2ml EOD, and give my body a break, because I am getting tired of shooting every day, I have been doing so for too long...
	__________________ While BM11 generally tries to relay accurate information based the research that he has done, he is occasionally wrong, and offers apologies in advance for being so, on the occasions that wrong information is given.