fina kits

pellius · 04-06-2008, 06:57 AM

It's been a while since I've used the kits. Back in the Mr. T/FinaFarm days. Who's making the best kits nowadays? LionNutrition seems to have discontinued them.

Brianincali · 04-08-2008, 02:07 AM

Bump for info please.

P4D2A0 · 04-09-2008, 06:28 PM

i hear KNM is not good anymore

Brianincali · 04-09-2008, 08:06 PM

P4D2A0 · 04-09-2008, 08:11 PM

nah, ive been looking myself honestly bro. id rather buy a kit instead of make my own cuase ive never done it before...

trapz · 04-10-2008, 08:47 AM

jsut get yourself some BA/BB and oil, thats the main and often only solvents in most of the kits.... some use guaicol but its not necessary.

pellius · 04-10-2008, 07:27 PM

Quote:

Originally Posted by trapz

jsut get yourself some BA/BB and oil, thats the main and often only solvents in most of the kits.... some use guaicol but its not necessary.

Are you sure about that? I mean, damn sure?

nibbe828 · 04-10-2008, 07:49 PM

Quote:

Originally Posted by pellius

Are you sure about that? I mean, damn sure?

yes he is

comsol1 · 04-10-2008, 09:05 PM

Ok guys hopefully we'll get some help on this front here soon so we can all get back to having all the info on hand to do what we need to do. The ba/bb soak dissolve filter method works but is not prefered because you aren't sure of exactly how much fina you are pulln. Me honestlyh I prefer to wash my pellets then just do a powder conversion. I recently did a complete wash filter dry conversion in about three hours recently.This is with slowly drying the powder no real heat as I didn't want to damage my tren. the whole crystal fina method is nice to look at but takes to long. Just dissolve your pellets in methanol OR acetone and filter out most of the gunk with coffee filter. Add 1000ml of water and shake vigourously. Filter through 3Xcoffee filter and this will give AT LEAST 90% conversion. Then jsut so a ba/bb conversion with FILTERING BEING OBVIOUS.

sik_swole · 05-08-2008, 03:21 PM

Quote:

Originally Posted by comsol1

Ok guys hopefully we'll get some help on this front here soon so we can all get back to having all the info on hand to do what we need to do. The ba/bb soak dissolve filter method works but is not prefered because you aren't sure of exactly how much fina you are pulln. Me honestlyh I prefer to wash my pellets then just do a powder conversion. I recently did a complete wash filter dry conversion in about three hours recently.This is with slowly drying the powder no real heat as I didn't want to damage my tren. the whole crystal fina method is nice to look at but takes to long. Just dissolve your pellets in methanol OR acetone and filter out most of the gunk with coffee filter. Add 1000ml of water and shake vigourously. Filter through 3Xcoffee filter and this will give AT LEAST 90% conversion. Then jsut so a ba/bb conversion with FILTERING BEING OBVIOUS.

Keep us posted on your conversion Cosmo..
I Just today finished my my fina.

I am now waiting as syno-prop crystals to dry..

pellius · 05-09-2008, 03:29 PM

I spoke with Mr. T about this and this is what he told me:

For converting fina pellets, I just used ba/bb in a ratio of about 35% ba and 65% bb. It takes about 5ml's of this solution to dissolve one cartridge of finaplix. So for each cartridge, you would use 5ml's of your solvent , and the trenbolone from each cartridge will take up almost 2ml's of volume, and then just dilute with oil, to reach your desired concentration.
Hope this helps!!

T

I also questioned the amount of BA and he did verify it. The pain in an injection is not because of the BA but the high concentration of hormones. Being a home brewer I have found that to be the case.

P4D2A0 · 05-09-2008, 04:30 PM

nice post pellius. very interesting about the BA

pellius · 05-10-2008, 04:17 PM

Quote:

Originally Posted by P4D2A0

nice post pellius. very interesting about the BA

BTW, I did try it with a pack of Component TH and everything went fine. Slight localized swelling but no pain. I let it sit in the BA/BB solution for about 24 hours, heated it slightly (in a microwave) and swirled it around to make sure all the pellets were dissolved, coffee filtered (again I let it sit and drain over night), then heat in a pan of water while filtering it with a sterile Whatman. I also used EO instead of regular oil so chit is smooth.

No more worrying about getting kits and no more worrying about getting Chinese garbage.

shugamama · 05-10-2008, 04:58 PM

Quote:

Originally Posted by pellius

No more worrying about getting kits and no more worrying about getting Chinese garbage.

I'm fine converting finaplix without a kit, but how about synovex kits? If you're not ordering those, what are you using as an estrogen solubizer?

nibbe828 · 05-10-2008, 07:44 PM

Quote:

Originally Posted by shugamama

I'm fine converting finaplix without a kit, but how about synovex kits? If you're not ordering those, what are you using as an estrogen solubizer?

That's the question we all have been asking for a long time. It's a very well kept secret to say the least.

sik_swole · 05-11-2008, 11:52 PM

Quote:

Originally Posted by nibbe828

That's the question we all have been asking for a long time. It's a very well kept secret to say the least.

It's out there for sure though.....

nibbe828 · 05-12-2008, 12:09 AM

Quote:

Originally Posted by sik_swole

It's out there for sure though.....

Yup! I remember seeing it somewhere but I can't find the place again.

sNiPeR6 · 05-12-2008, 10:42 AM

I'm gonna be converting for the first time. I think I just want to stick with a kit and good instructions before I try to start mod'ind any ingredients/directions.. Know where to find a good kit? Thanks in advance for any good info....

sik_swole · 05-12-2008, 12:30 PM

Quote:

Originally Posted by nibbe828

Yup! I remember seeing it somewhere but I can't find the place again.

YGM

Quote:

Originally Posted by sNiPeR6

Know where to find a good kit? Thanks in advance for any good info....

Stuff like like should be treated like asking for a source..

RockReady4x4 · 05-12-2008, 06:18 PM

Nibbe,
I'd really like to sit and chit-chat with you some time about all this.

04-06-2008, 06:57 AM	#1 (permalink)
pellius New Member pellius's Stats Join Date: Apr 2008 Posts: 11 Status: Offline pellius's Info Location: Country:	fina kits It's been a while since I've used the kits. Back in the Mr. T/FinaFarm days. Who's making the best kits nowadays? LionNutrition seems to have discontinued them.

04-09-2008, 08:06 PM	#4 (permalink)
Brianincali Member Brianincali's Stats Join Date: Jul 2006 Posts: 77 BlackJack Champion! Status: Offline Brianincali's Info Location: Country:
	Last edited by Brianincali; 05-19-2008 at 12:42 AM.

04-10-2008, 08:47 AM	#6 (permalink)
trapz Senior Member trapz's Stats Join Date: Jul 2006 Posts: 9,544 Status: Offline trapz's Info Location: Country:	jsut get yourself some BA/BB and oil, thats the main and often only solvents in most of the kits.... some use guaicol but its not necessary.
	__________________ "some say im gangsta some say im crazy, if they ask me, i say im what i say the hood made me....now i can stunt til my ass is broke like jay z, or put 100grand on any nigga ass who try an play me"

05-12-2008, 06:18 PM	#20 (permalink)
RockReady4x4 Senior Member RockReady4x4's Stats Join Date: Dec 2007 Posts: 1,807 Status: Offline RockReady4x4's Info Location: Albuquerque, NM Country:	Nibbe, I'd really like to sit and chit-chat with you some time about all this.
	__________________ Last thing I remember was sayin, "Hey ya'll, Watch this"! *Rock*

04-08-2008, 02:07 AM	#2 (permalink)
Brianincali Member Brianincali's Stats Join Date: Jul 2006 Posts: 77 BlackJack Champion! Status: Offline Brianincali's Info Location: Country:	Bump for info please.

04-09-2008, 06:28 PM	#3 (permalink)
P4D2A0 Senior Member P4D2A0's Stats Join Date: Feb 2007 Posts: 626 Status: Offline P4D2A0's Info Location: Country:	i hear KNM is not good anymore

04-09-2008, 08:11 PM	#5 (permalink)
P4D2A0 Senior Member P4D2A0's Stats Join Date: Feb 2007 Posts: 626 Status: Offline P4D2A0's Info Location: Country:	nah, ive been looking myself honestly bro. id rather buy a kit instead of make my own cuase ive never done it before...

05-09-2008, 04:30 PM	#12 (permalink)
P4D2A0 Senior Member P4D2A0's Stats Join Date: Feb 2007 Posts: 626 Status: Offline P4D2A0's Info Location: Country:	nice post pellius. very interesting about the BA

05-12-2008, 10:42 AM	#18 (permalink)
sNiPeR6 Member sNiPeR6's Stats Join Date: May 2008 Posts: 48 Status: Offline sNiPeR6's Info Location: watchin ya thru my crosshairs, 5000 meters away Country:	I'm gonna be converting for the first time. I think I just want to stick with a kit and good instructions before I try to start mod'ind any ingredients/directions.. Know where to find a good kit? Thanks in advance for any good info....